|
|
Workshop on
Reliability Testing of Electronic /
Electrical
Components &
Equipments
(A Necessity for OEM Business & Submission of
Tenders)
20th August,
2010
10:00
am to 5.30 pm
----------------------------------------------------------------------------
Venue : ELCINA House
422, Okhla Industrial Estate, Phase - III,
New Delhi - 110 020, Ph:
011-26928053 |
|
SPECIAL
OFFER FOR CEHA MEMBERS [CEAMA, ELCINA, ISA, MAIT,
TEMA]
Dear Sir/ Madam,
ELCINA Center for
Knowledge Management is organizing Workshop on Reliability Testing of Electronic / Electrical Components
& Equipments (A Necessity for OEM Business
& Submission of Tenders) on 20th August, 2010 in ELCINA
House, New Delhi.
 Introduction
Reliability testing of
electronic / electrical components and products is essential for
marketing these items. Reliability tests involve comprehensive
testing for all electrical & mechanical parameters, as well as
environmental parameters. This workshop will explain in detail the
requirements and process for doing tests and also the acceptance
testing which is required to be conducted repeatedly to ensure
quality, performance and customer satisfaction.
Reliability may be defined
in several ways including ability of a device to perform a required
function under stated conditions for a specified period of time, its
capacity to perform as designed, resistance to failure and also the
ability of something to “fail well” (fail without catastrophic
consequences). Many engineering techniques are used to predict
reliability and one of these is reliability testing and accelerated
life testing. This workshop is intended to give an overview of
reliability testing.
The purpose of reliability
testing is to discover potential problems with the design as early
as possible and ultimately provide confidence that the system meets
its reliability requirements. This can be performed at component
level as well as for a circuit based unit, assembly, and the system
levels.
Workshop Content
1.
Part Reliability
-
Component
testing
-
Sub-assembly
testing
2. Product
Reliability:
3. Routine Test of
components mentioned above.
4. Acceptance Test –
Transformers, Resistors, Potentiometers, Switches, Capacitors, Plug
–
Socket, Power
Supply, Diodes, Inverters, SMPS Supplies of Computers
etc.
5.
Role of Environmental in Reliability
6. Design of Test Schedule
7.
Design of Sampling Plan
8.
Test Equipment 9. Preferred
Voltages
Who will it benefit most?
- This is a broad based programme for
all Electronics and Electrical Industries Manufacturing Electronic
/ Electrical Components & Equipments, such as passive
Components, Electromechanical Components, Electrical Components
(cables and connectors etc.).
- Engineers from R&D,
Engineering, Quality Assurance & Reliability Testing will
particularly benefit. The workshop will also benefit executives
from Purchase and Marketing Department for general
awareness.
- Faculty :
- Ms. Mallika Gope is B.E (Electronics
& Communication) and possesses more than 15 years’ experience
in Reliability Testing, Industrial Training, Lab Quality
Management Systems and like disciplines. She is heading the group
of Engineers in a Research Foundation with accredited Laboratory
for Testing & Type Approvals.
Duration : One day
Participation Charges :-
- ELCINA & CEHA
Members : Rs. 2000/- per participant
(Rs.2206/- incl. Service Tax)
- Non-Members
: Rs. 2500/- per participant (Rs. 2758/- incl. Service
Tax)
- (Service Tax 10.30%)
- 10% discount will be
offered to companies sponsoring 2 or more participants. Maximum 25
participants will be accepted for the workshop on first come first
serve basis
-
- Cheques / DD to be made in favour of
“ELCINA Electronic Industries Association of India” payable at New
Delhi.
-
- The Participation fee
includes study material, refreshment, lunch and other
organizational expenses.
-
- Your nominations (form
enclosed) should reach us at the earliest but not later than 18th
August, 2010. However, advance nomination could be sent to us by
email/fax so that the seats (s) are reserved for your participants
(s).
.gif) Registration
- NOTE: Kindly register by
filling up the Response Form attached and send by Fax or email
to:
-
- Ms. Tandra Majumder, ELCINA
Electronic Industries Association of India, ELCINA House, 422
Okhla Industrial Estate, Phase - III, New Delhi-110020, Tel
No.:011-26928053, 26924597, Fax No. 26923440, email id:
ckm@elcina.com, Training@ckm-elcina.com
-
- "To download/view the
Program Circular for this workshop as well as other forthcoming
workshops, please click on the link below:-
-
- http://elcina.com/ckm/services-ckm.htm
- Supported by
- Council of Electronic
Hardware Associations
- ( A Joint endeavor of
CEAMA, ELCINA, ISA, MAIT & TEMA)
*****************************************************************************
(1).gif) About ELCINA-CKM
- ELCINA-CKM was established to guide
and empower industry to focus on the right management and quality
tools enabling it to produce environmentally friendly high quality
products at the lowest cost using relevant technology for
competitiveness.
-
- The focus areas for skill and
competence enhancement are:
- Quality Improvement
Programs
- Cost
Competitiveness
- Management System
Standards
- Technology Up
gradation
- Organisational
Efficiency
- ELCINA-CKM also takes
up On-site / In-House Training for industry requiring
programs for organisation development.
-
- List of Skill Development Trainings
for Business Excellence are listed below.
- S. No.
|
- Workshop Title
|
- Days
|
- 1
|
- Problem Solving Process - Basic
7 QC Tools
|
- 2
|
- 2
|
- 5S – Work Place
Management
|
- 2
|
- 3
|
- SPC - Statistical Process
Control
|
- 1
|
- 4
|
- MSA - Measurement System
Analysis
|
- 1
|
- 5
|
- Quality Improvement &
Implementation - Kaizen Culture
|
- 2
|
- 6
|
- FMEA - Failure Mode &
Effects Analysis (Product & Processes)
|
- 2
|
- 7
|
- Managing Electrostatic
Discharge in Electronic Equipment
|
- 1
|
- 8
|
- Product Testing for Safety
& EMI / EMC Concepts
|
- 1
|
- 9
|
- Reliability of Electronics
Components & Equipments
|
- 1
|
- 10
|
- Lean Manufacturing
|
- 3
|
- 11
|
- Total Cost Management
|
- 2
|
- 12
|
- Application of APQP / PPAP – QA
System for Supply Chain Management
|
- 2
|
- 13
|
- Energy Conservation
|
- 2
|
- 14
|
- Positive Attitude towards time
& its effective utilization
|
- 1
|
- 15
|
- Team Motivation &
Communication Skills
|
- 2
|
- 16
|
- Managerial Effectiveness for
Overall Performance
|
- 2
|
- 17
|
- Six Sigma Green Belt
Training
- Project Work to be done in
factory
- Project work evaluation &
certificate
|
- 4
- 6 Wks
- 1
|
- 18
|
- Overview Programmes for
Executive Briefing (One Day Each)
- ISO
9001:2008
- ISO 14001
- TS 16949
- OHSAS 18001
|
- 4
|
- 19
|
- Environmental, Occupational
Health & Safety - Legal Requirements & their
Compliance ISO 14001:2004 & OHSAS 18001:2007
|
- 2
|
|
Rajoo Goel
Secretary
General, ELCINA Electronic Industries Association of
India
|
R R
Jhusiwala
Technical Advisor, ELCINA Center for
Knowledge
Management | |
